5.0 Based on 13 Reviews
from $149.99
$119.99
SAVE $30.00
Replaces your box spring with a slim, sturdy slat system — no bulk, no squeaks, no cost of a traditional box spring.
Reinforced plywood slats wrapped in industrial-grade fabric. Built to support modern memory foam, hybrid, and innerspring mattresses.
Unfolds and drops into your bed frame in minutes. No tools, no assembly.
Size: Twin (38x74’’)
Size chartEst. delivery to 90210 by Thurs, 21 May
Free shipping
30-day risk-free trial
Lifetime warranty
Skip the 7–9 inch box spring. Get a clean, low-profile foundation that fits your bed frame the way it was designed.
Reinforced plywood slats give memory foam, hybrid, and innerspring mattresses the flat, rigid surface they need to perform.
Unfolds and lays flat inside your bed frame in minutes. No tools, no hardware, no setup.
Built specifically for modern bed frames designed for a flat foundation.
Join 500,000+ households who've restored their furniture instead of replacing it.
These SlatSure Bunkie Boards are very nice. The quality is heavy duty and sturdy as stated. I like the gray non-slip padding on the backside that keeps them from sliding. They come in two vertical sections linked together with strong fabric and Velcro. The finish is smooth, not like some other unfinished boards. I purchased the Queen size and they fit and support my queen size platform bed perfectly. They didn’t change the height of my 15" mattress which is great. Definitely worth every penny — especially if you have a platform bed with a few horizontal slats. They even included a handwritten thank-you note. Nice touch!
Amazon Customer
SlatSure™ Bunkie Board — Vertical Bed Slats
Fits perfectly. Just what I needed as I hate box springs.
Ewang
SlatSure™ Bunkie Board — Vertical Bed Slats
I couldn’t be happier with these slats! These are really high quality and 1/2" thick. Each slat is 3.25" wide with about 2.5" between them — meeting the requirements of all the mattresses in our house. Very easy to set up: the slats are attached with fabric and just need to be unrolled across the existing bed frame. I prefer these to a solid bunkie board as they allow the mattress to breathe. Not cheap, but thick and very high quality — a worthwhile investment.
MDC
SlatSure™ Bunkie Board — Vertical Bed Slats
I have a basic metal bed frame with no box spring. The mattress was squeezing through the thin metal slats — not good. The queen size comes in two sections so it’s easier to maneuver, which I appreciated since I installed it by myself. The boards fit snugly under the lip of my bed frame so they don’t slide off. No more mattress material squeezing out the bottom. I suspect this will extend the life of the mattress. Five out of five stars.
Michelle Cohen
SlatSure™ Bunkie Board — Vertical Bed Slats
I got this to go under my daughter’s mattress because the slats on her new bed were spaced way too far apart. Really straightforward to get in place — we rolled it out, lined it up, and that was it. The grip side on the bottom keeps everything from sliding around. The boards are thick and sturdy, and there’s absolutely no sagging now. Her mattress finally has a solid, even surface. Works exactly the way you want it to. I’d buy it again.
Shawna
SlatSure™ Bunkie Board — Vertical Bed Slats
This was a lifesaver. It may run a little on the more expensive side, but it’s less expensive than replacing an entire bedframe. I would absolutely go this route again. Made of great material, great value for your money. The quality is fantastic and slide-resistant.
Shannon Marie Proch
SlatSure™ Bunkie Board — Vertical Bed Slats
Best for
Closing slat gaps under any mattress
Replacing a broken or bulky box spring
Heavy mattresses on platform beds
Profile
Ultra-low profile (1/3")
Low-profile slats
Low-profile frame insert
Replaces Box Spring?
No
Yes
Yes
Feel
Firm
Rigid
Rigid + reinforced
Materials
Twin-wall polypropylene
Reinforced plywood
Wood + metal hybrid
Installation
Unfold and place
Unfold and place
Assemble frame and drop-in
Sizes
8 sizes
4 sizes
4 sizes
Shawna
United States
I got this to go under my daughterÕs mattress because the slats on her new bed were spaced way too far apart. This bunkie board was really straightforward to get in place. We rolled it out, lined it up, and that was pretty much it. The grip side on the bottom is actually really nice because it keeps everything from sliding around when the bed gets moved or when she plops down on it. The boards themselves are thick and sturdy, and thereÕs absolutely no sagging now. Her mattress finally has a solid, even surface, which gives me a lot more peace of mind. For what it is, it works exactly the way you want it to and does the job perfectly. IÕd buy it again.
Phillip K.
Brevard, NC
Met all expectations.
Candy M.
United States
This review is for Meliusly SlatSure King Size Bunkie Board Ð Heavy Duty Vertical Bed Slats & Foldable Wooden Support Board for Sagging Mattress or Platform Bed Frame, Box Spring Alternative and Replacement. The price at the time of the review was $144.99. This bunkie board is a solid upgrade for any bed frame, providing a flat and supportive surface without the bulk of a traditional box spring. The heavy-duty engineered wood slats are spaced under 2.5 inches apart, which gives continuous support across the mattressÑperfect for memory foam, latex, or hybrids. I like that it folds for easy handling and arrives ready to use with no assembly required. The Oxford fabric bottom with silicone coating keeps it from slipping, reduces noise, and protects the frame. It feels sturdy, breathable, and well-made, making it a reliable solution for sagging mattresses or platform setups.
TJ P.
United States
This thing is real heavy. Much heavier than I imagined. This is not a knock but just the opposite. as you can see in the attached video, these boards were made from high-quality material and even have an anti-slip material on one side. They are very thick, especially compared to anything IÕve ever had before. They are super easy to stall and the give rock solid support. IÕm 180 pound grown man and feel like I could jump up and down on the bed and I wouldnÕt even budge these things. I havenÕt tested that out. IÕm just trying to relate how heavy duty these things feel. I like that they are all fastened together. It just makes installation quicker and easier. $134 price tag seems a bit high at first for a product like this, but this is definitely heirloom quality and should last a lifetime.
tal
United States
Excellent slats that made my frame useable for my foam mattress without the need for a box frame anymore. I really like this product. Simple to use right out the gate. It is the correct size for my queen size bed. A great value for this easy solution.
Free Shipping on All Orders
30-Day Risk-Free Trial
Lifetime Warranty
