Sleeper Sofa Support Guide
Stop the bar-in-the-back, the sagging mattress, the bad guest sleep — choose the right SleeperSaver™ for your setup.
Select a product to view information
Selected Product
SleeperSaver™ Pro Guide
Features
Full-Length Coverage
Covers the entire mattress surface and metal frame underneath.
Permanently Installed Design
One-time setup with hook-and-loop fasteners. Folds with the sofa, stays put.
Reinforced Plywood Core
Industrial-grade rigidity that doesn’t bend, sag, or warp.
Hook-and-Loop Straps
Hold onto the metal frame so the board doesn’t shift, slide, or move during sleep.
Installation
- 1
Expand the sofa bed and remove the mattress off the sofa bed.
- 2
Unpack your SleeperSaver and put it flat on the canvas. The SleeperSaver is NOT supposed to sit on the springs. Hint: "Mattress Facing" indicates which side must face upwards.
- 3
Fasten the hook and loop strips on the edges of the board to the frame of the sofa bed. Start at the top and bottom, then both sides.
- 4
Place the mattress on top and enjoy enhanced firmness and comfort. Note: When folding up the sofa bed for the first time, do it slowly and ensure that the board is properly folded within the mechanism.
One-time Setup
No Tools Required
Installs in Seconds
Sizing & Fit
Designed to fit the most common sleeper sofa dimensions.
- Twin: 35 × 64 inches
- Full: 46 × 64 inches
- Queen: 54 × 64 inches
FAQ
Will this work with my sofa bed?
SleeperSaver™ Pro is designed for standard sleeper sofas with metal pull-out frames in Twin, Full, and Queen sizes. It works with sofas from most major brands. To check fit, pull out your sofa bed completely and measure the width of the mattress — if it matches one of our three sizes (35", 46", or 54"), you’re good. If you have an unusual sofa bed setup or aren’t sure, contact us with a few photos and dimensions and we’ll help confirm fit before you order.
Does it cover the entire sleeping area?
Yes. SleeperSaver Pro is sized to cover the full length and width of your sleeper sofa mattress, blocking the metal support bars across the entire sleeping surface. No partial coverage, no gaps where the bars can still be felt.
What size sofa beds does this fit?
Three sizes available: - Twin: 35 × 64 inches - Full: 46 × 64 inches - Queen: 54 × 64 inches The 64-inch length is consistent across all three sizes — only the width changes to match your mattress. Measure the width of your mattress when the bed is fully pulled out and order accordingly.
Will this support heavier guests?
Yes. SleeperSaver Pro is built from reinforced plywood and designed for normal residential use, including heavier adults. The board distributes weight evenly across the metal frame, which actually reduces stress on the frame compared to mattress-on-bars alone.
What if I don’t like it or it doesn’t work for my sofa?
We offer a 30-Day Risk-Free Trial. Install the board, sleep on it, have your guests sleep on it. If it doesn’t solve the comfort problem, send it back within 30 days for a full refund. No restocking fees, no questions asked.
Will this make the mattress too firm?
No. SleeperSaver Pro doesn’t change the firmness of your mattress — it just gives the mattress a flat, even surface to rest on instead of metal bars and gaps. The mattress feels the way it was designed to feel, not stiffer. If anything, guests typically describe the result as “finally comfortable” or “like a real bed” — not firmer.
Can I leave it installed all the time?
Yes — that’s exactly how it’s designed to work. Once installed with the hook-and-loop fasteners, SleeperSaver Pro stays in place permanently. It folds with your sofa bed every time you close it, and unfolds with the bed every time you open it. No removing, no reinstalling.
How long does it last?
Every SleeperSaver Pro is backed by our Lifetime Warranty. If it ever fails — rips, cracks, loses structural integrity, or stops performing under normal use — we’ll replace it free. No receipts, no expiration date. The board is built from industrial-grade materials (reinforced plywood, fabric covering, non-slip backing) designed to withstand years of daily use.
Still need help? Contact Support
Compare Our Sofa Bed Support Boards
Best for
Permanent install & max support
Regular overnight guests
Occasional guests & easy storage
Material
Reinforced plywood, fabric-covered
Reinforced plywood, roll-up
10mm twin-wall polypropylene
Feel
Firm & rigid
Firm & rigid
Slight flex
Installation
Permanent (slides under mattress)
Remove & fold for storage
Remove & fold for storage
Weight
Medium-heavy
Medium-heavy
Lightweight
But Don't Take Our Word For It
Join 500,000+ households who've restored their furniture instead of replacing it.
Comfortable
I bought the Meliusly Sleeper Sofa Support Board for my pull out couch, and it made a big difference. Before, I could feel the bars under the mattress, but now it feels much more even and comfortable. It’s easy to set up and just stays in place, even when folding the sofa back.
Gulkaiyr Bayram
SleeperSaver™ Pro Guide
Folds With the Mattress
Very happy with this board. I was really wanting a support solution that would not have to be removed and stored, then installed when in use. This fit the bill. It provides support under the sleeper sofa mattress for a better sleeping experience. You no longer feel the bars underneath, and most importantly, it folds with the frame and mattress seamlessly.
CF
SleeperSaver™ Pro Guide
Simple Fix for an Uncomfortable Sofa Bed
I bought this support board for our pull-out couch because you could always feel the metal bar through the mattress. After adding this board, the difference was noticeable right away. It creates a much more even surface and you can’t feel the bars anymore. I also like that it folds with the sofa, so we can just leave it installed.
Juliane Bleidorn
SleeperSaver™ Pro Guide
Great Support & Comfort
What a nice find! This was so needed for our RV sleeper couch. The boards are extremely firm with no bending, and the cover and tie-downs are well-made. The mattress stays put with absolutely no sagging in the middle, and it folds up with ease — you’d never know this extra layer was on the bed frame. Cool product, highly recommended.
FN
SleeperSaver™ Pro Guide
Helps a Sofa Sleeper Feel More Comfortable
If you have a cheaply made sofa sleeper like we do, you will appreciate this device. Adding this to the sofa sleeper really made the sleeper feel like it is made of a higher quality. The best part is that you install it and can leave it on. You can fold the sleeper bed away and leave this item in. Very convenient.
JAC
SleeperSaver™ Pro Guide
It Functions Well!
A fantastic solution for anyone with an uncomfortable full-size sofa bed. It perfectly addresses the problem of noticeable springs — we used to need an extra mattress just to sleep! Now, thanks to this board, the mattress is firm, flat, and the center no longer sags. Well-executed design that allows for secure attachment and convenient folding onto the sofa, even with the mattress.
Michelangelo Comulada
SleeperSaver™ Pro Guide
Free Shipping on All Orders
30-Day Risk-Free Trial
Lifetime Warranty